# Calibration Files in eVOLVER

**URL:** <https://www.evolver.bio/t/calibration-files-in-evolver/108>\
**Category:** Uncategorized\
**Created:** [July 1, 2019, 8:30pm UTC](https://www.evolver.bio/t/calibration-files-in-evolver/108 "2019-07-01T20:30:13Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![bgwong](https://yyz1.discourse-cdn.com/flex035/user_avatar/www.evolver.bio/bgwong/32/262_2.png) [@bgwong](https://www.evolver.bio/u/bgwong)\
**Post date:** [April 15, 2021, 3:59pm UTC](https://www.evolver.bio/t/calibration-files-in-evolver/108/7 "2021-04-15T15:59:45Z")

</div>

Please continue thread on this post:

> [@Failure to run calibration code, gets hung up at various points](https://www.evolver.bio/t/failure-to-run-calibration-code-gets-hung-up-at-various-points/165/):
>
> When trying to run the OD calibration code, the commands seem to get hung up before completion, but when initially setting up the machine a month ago the code was able to run fine. When trying to list calibration files, the terminal consistently gets hung up on ‘Waiting for evolver connection…’ When trying to run the actual calibration file, it either gets hung up after ‘connected to evolver as client’ or right bef…

Please include screen shots of your terminal and also what IP address the evolver is. You can locate that on the upper right corner of the touch screen on the eVOLVER.

---

_[View the full topic](https://www.evolver.bio/t/calibration-files-in-evolver/108)._
