# eVOLVER Wiki + Software Release 2.0.0

**URL:** <https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383>\
**Category:** Software\
**Created:** [July 25, 2022, 4:21pm UTC](https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383 "2022-07-25T16:21:51Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![heinsz](https://yyz1.discourse-cdn.com/flex035/user_avatar/www.evolver.bio/heinsz/32/52_2.png) [@heinsz](https://www.evolver.bio/u/heinsz)\
**Post date:** [September 7, 2022, 11:40pm UTC](https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383/21 "2022-09-07T23:40:41Z")

</div>

Sorry it’s still not working for you. Can you log into the RPi via terminal and run the following:

```auto
sudo supervisorctl
tail -f evolver

```

then let that run for about a minute and post a screenshot here? Also try to set the stir while this is running.

---

<div class="post-metadata">

**Author:** ![kawidney](https://avatars.discourse-cdn.com/v4/letter/k/a9adbd/32.png) [@kawidney](https://www.evolver.bio/u/kawidney)\
**Post date:** [September 8, 2022, 5:01pm UTC](https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383/22 "2022-09-08T17:01:36Z")

</div>

![Screen Shot 2022-09-08 at 10.58.04 AM](https://canada1.discourse-cdn.com/flex035/uploads/evolver/original/1X/8c7915ee64a8e6f79159c62839ac8e099a1909c5.png)

This was after about 5 minutes. “Received COMMAND” occurred when I tried to change the stir rate. “Time to set active cals…” occurred when set the different calibrations.

---

<div class="post-metadata">

**Author:** ![heinsz](https://yyz1.discourse-cdn.com/flex035/user_avatar/www.evolver.bio/heinsz/32/52_2.png) [@heinsz](https://www.evolver.bio/u/heinsz)\
**Post date:** [September 8, 2022, 5:26pm UTC](https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383/23 "2022-09-08T17:26:50Z")

</div>

Can you send a screenshot of your `conf.yml` file located at `~/evolver/evolver/conf.yml`?

---

<div class="post-metadata">

**Author:** ![heinsz](https://yyz1.discourse-cdn.com/flex035/user_avatar/www.evolver.bio/heinsz/32/52_2.png) [@heinsz](https://www.evolver.bio/u/heinsz)\
**Post date:** [September 8, 2022, 5:30pm UTC](https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383/24 "2022-09-08T17:30:21Z")

</div>

I think I left out a critical detail in my original post - you need to add this line to your conf.yml file then restart the eVOLVER:

> <https://github.com/FYNCH-BIO/evolver/blob/master/evolver/conf.yml#L60>

---

<div class="post-metadata">

**Author:** ![kawidney](https://avatars.discourse-cdn.com/v4/letter/k/a9adbd/32.png) [@kawidney](https://www.evolver.bio/u/kawidney)\
**Post date:** [September 8, 2022, 5:59pm UTC](https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383/25 "2022-09-08T17:59:47Z")

</div>

That did it! Thank you for all the help

---

<div class="post-metadata">

**Author:** ![karolbuda](https://yyz1.discourse-cdn.com/flex035/user_avatar/www.evolver.bio/karolbuda/32/470_2.png) [@karolbuda](https://www.evolver.bio/u/karolbuda)\
**Post date:** [September 16, 2022, 2:41am UTC](https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383/26 "2022-09-16T02:41:15Z")

</div>

Worked for me as well, thanks for documenting the awesome discussions! Just wanted to chime in and let you know that aside from only having the “Setup” button which you already mentioned, I have also lost the ‘dragging’ feature on the devices GUI. Otherwise everything works well.

[Previous page](https://www.evolver.bio/t/evolver-wiki-software-release-2-0-0/383.md?page=1)