# Switch protector

**URL:** <https://www.evolver.bio/t/switch-protector/163>\
**Category:** Hardware\
**Created:** [December 9, 2019, 2:02pm UTC](https://www.evolver.bio/t/switch-protector/163 "2019-12-09T14:02:27Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![dcoudreuse](https://avatars.discourse-cdn.com/v4/letter/d/51bf81/32.png) [@dcoudreuse](https://www.evolver.bio/u/dcoudreuse)\
**Post date:** [December 9, 2019, 2:02pm UTC](https://www.evolver.bio/t/switch-protector/163/1 "2019-12-09T14:02:27Z")

</div>

Hi all,

We have noticed that once in a while, when leaning over the eVOLVER, it can happen that we accidentally push one of the main switch buttons (12 V or 5 V). So we built a small protection for the switches. You only need PMMA, a CO2 laser cutter and some epoxy glue. On the bottom plate, there is a square cutout for the eVOLVER foot, allowing this protection not to move around.

This is all designed, cut and mounted by my PhD student @danigarcia ! And he decided to help my poor memory by engraving the eVOLVER IP on the door !

Attached are pictures of the part. I would like to upload the illustrator or editable pdf file, but the forum does not allow me to upload these kind of files…how can I share the design ?

Cheers

Damien

 ![20191209_145148_resized](https://canada1.discourse-cdn.com/flex035/uploads/evolver/original/1X/e96e526d87b779a1cdd23539d04514ff8e83bfdd.jpeg)

 ![20191209_145158_resized](https://canada1.discourse-cdn.com/flex035/uploads/evolver/original/1X/3cb2979f28d4d1aa111cc6808b6e5b5dfe78c20a.jpeg)

---

<div class="post-metadata">

**Author:** ![bgwong](https://yyz1.discourse-cdn.com/flex035/user_avatar/www.evolver.bio/bgwong/32/262_2.png) [@bgwong](https://www.evolver.bio/u/bgwong)\
**Post date:** [December 9, 2019, 4:38pm UTC](https://www.evolver.bio/t/switch-protector/163/2 "2019-12-09T16:38:44Z")

</div>

Github would be a nice way to do this, and then post a link here? @heinsz any other thoughts?

---

<div class="post-metadata">

**Author:** ![heinsz](https://yyz1.discourse-cdn.com/flex035/user_avatar/www.evolver.bio/heinsz/32/52_2.png) [@heinsz](https://www.evolver.bio/u/heinsz)\
**Post date:** [December 9, 2019, 5:14pm UTC](https://www.evolver.bio/t/switch-protector/163/3 "2019-12-09T17:14:16Z")

</div>

Maybe make a new directory in this repo for now? [https://github.com/FYNCH-BIO/pcb](https://github.com/FYNCH-BIO/pcb)

I can change the name to be a general hardware repository.

---

<div class="post-metadata">

**Author:** ![dcoudreuse](https://avatars.discourse-cdn.com/v4/letter/d/51bf81/32.png) [@dcoudreuse](https://www.evolver.bio/u/dcoudreuse)\
**Post date:** [December 11, 2019, 7:50pm UTC](https://www.evolver.bio/t/switch-protector/163/4 "2019-12-11T19:50:16Z")

</div>

Sounds good ! I tried to create something in there…but logically, I don’t have write access…

---

<div class="post-metadata">

**Author:** ![heinsz](https://yyz1.discourse-cdn.com/flex035/user_avatar/www.evolver.bio/heinsz/32/52_2.png) [@heinsz](https://www.evolver.bio/u/heinsz)\
**Post date:** [December 16, 2019, 6:05pm UTC](https://www.evolver.bio/t/switch-protector/163/5 "2019-12-16T18:05:07Z")

</div>

You have to make a pull request - directly pushing to branches is a no-no for the most part. This article should be helpful: [https://opensource.com/article/19/7/create-pull-request-github](https://opensource.com/article/19/7/create-pull-request-github)

There is also a way to use git via a GUI: [https://desktop.github.com/](https://desktop.github.com/)  
I don’t use it, but I’ve heard it is pretty intuitive.
